MasterForce 15A Jobsite Table Saw Manual del operador descargar pdf (Pagina 10)

WARNING:

Page 9

SAFETY INSTRUCTIONS

17. Bevel scale: The easy-to-read scale on

the front of the table saw cabinet shows the

exact blade angle.

18. Blade: For maximum performance, use

of the 10” (25.4 cm) carbide-tipped

combination blade provided with this saw

is recommended. The blade is raised and

lowered with the height-adjusting handle.

Bevel angles are locked using the bevel-

locking lever. Additional blade styles of the

same high quality are available for specic

operations, such as ripping.

Do not use blades

rated less than the speed of this tool.

Failure to heed this warning could result in

personal injury.

19. Blade guard: Always keep the guard

down over the blade for through-sawing

cuts.

20. Bevel-locking lever: Located under the

worktable surface on the front of the

cabinet, this lever locks the angle setting of

the blade.

21. Height-adjusting handle: Located on the

front of the cabinet, this knob is used to

lower and raise the blade for adjustments or

blade replacement.

22. Bevel-adjusting hand wheel: Located on

the front of the cabinet, the hand wheel

makes adjusting for bevel angles easy.

23. Fence-locking lever: The lever on the

front of the rip fence releases the rip fence

or locks it in place.

24. Miter gauge: This miter gauge aligns the

wood for a crosscut. The easy-to-read

indicator shows the exact angle for a miter

cut, with positive stops at 0˚ and 45˚.

25. Miter gauge grooves: The miter gauge

rides in these grooves on either side of the

blade.

26. Rip fence: A sturdy metal fence that

guides the workpiece, and is secured with

the locking lever.

27. Scale: Located on the front rail, the

easy-to-read scale provides precise

measurements for rip cuts.

28. Sliding table extension: Located on the

right side of the saw table, this extension

table gives the operator additional support

when cutting wide workpieces.

29. On/Off switch assembly: This saw has an

easy access switch. To lock the switch in the

OFF position, remove the yellow switch key

from the switch. Place the key in a location

that is inaccessible to children and others

who are not qualied to use the tool.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Comentarios a estos manuales

Sin comentarios