MasterForce 241-0440 Manual del operador descargar pdf (Pagina 8)

DANCER! Blades coast after saw is switched off.

Hold tool by insulated gripping surfaces (handles) when performing an

operation where the cutting tool may contact hidden wiring or its own

cord. Contact with a “live” wire will make the exposed metal parts of the

tool “live” and shock the operator.

Cutting workpieces covered with oil can cause the blade to come off

unexpectedly. Wipe off all excess oil from workpieces before cutting.

Keep your body positioned to either side of the saw blade, but not in line

with the saw blade.

Do not touch the blade or the workpiece immediately after operation; they

may be extremely hot and could burn your skin.

Do not cut an oversized workpiece.

Check for the proper clearance under the workpiece before cutting

so that the blade will not strike the workbench or material under the

workpiece.

Make sure the blade is not contacting the workpiece before reaching full

speed.

Secure material before cutting. Never hold a workpiece in your hand or

legs. Small or thin material may ﬂex or vibrate with the blade, causing loss

of control.

Never reach into the cutting path of the blade.

SAFETY RULES FOR CHARGER

WARNING! Read and understand all instructions. Failure to follow all

instructions listed below may result in electric shock, ﬁre, and/or serious

personal injury.

Before using the battery charger, read all instructions and cautionary

markings in this manual and on the battery charger, the battery, and the

product using the battery to prevent misuse of the products and possible

injury or damage.

CAUTION! To reduce the risk of electric shock or damage to the charger

and battery, charge only these rechargeable batteries speciﬁcally designated

on your charger’s label. Other types of batteries may burst, causing personal

injury or damage.

Do not use the charger outdoors or expose it to wet or damp conditions.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

MasterForce 241-0440 Manual del operador Pagina 8