MasterForce 241-0440 Manual del operador descargar pdf (Pagina 10)

Page 9

OPERATION

TO ATTACH BATTERY

PACK (FIG.1)

FIG. 1

1. Lock the trigger switch in the “off” position.

2. Align the raised portion on the battery

pack with the grooves on the saw, and

then attach the battery pack to the tool

as shown.

NOTICE: Make sure that the latch on the bat-

tery pack snaps into place and the battery

pack is secured to the tool before beginning

operation.

CAUTION:

when placing battery

pack on the tool, be sure that the raised rib

on battery pack aligns with the groove on the

saw and the latches snap into place properly.

Improper assembly of the battery pack can

cause damage to internal components.

TO DETACH BATTERY

PACK (FIG. 1)

1. Lock the trigger switch in the “off” position.

2. Depress the battery release button

located on the battery pack to release

battery pack.

3. Pull the battery pack out and remove it

from the tool.

TRIGGER SWITCH (FIG. 2)

FIG. 2

To turn the tool ON, push the lock-off button

and depress the trigger switch.

To turn the tool OFF, release the

switch trigger.

INSTALLING A SAW

BLADE (FIG.3)

FIG. 3

WARNING:

To prevent personal

injury, always remove the battery pack from

the tool before installing or removing the saw

blade!

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios