MasterForce 241-0794 Manual del operador descargar pdf (Pagina 7)

Page 6

SAFETY INSTRUCTIONS

SERVICE

1. Have your power tool serviced by

a qualified repair person using only

identical replacement parts. This will

ensure that the safety of the power tool

is maintained.

SPECIFIC SAFETY RULES

FOR SANDER

1. Hold the tool by its insulated gripping

surfaces when performing an operation

where the tool may contact hidden wiring

or its own cord. Contact with a “live” wire

will make exposed metal parts of the tool

“live” and shock the operator.

2. Always wear safety goggles and a

dust mask when sanding, especially when

sanding overhead.

3. A suitable breathing respirator must

be worn while sanding chemically

pressure treated objects.

4. The machine is not suitable for wet

sanding.

5. Do not use sand paper that is larger

than needed. Extra paper extending

beyond the sanding pad can cause serious

lacerations.

6. The dust box or a vacuum system

should be used with the tool. The dust box

should be emptied frequently. Do not throw

sanding dust on an open fire, because

materials in fine particle form may be

explosive.

7. Do not wet sand with this sander.

Liquids entering the motor housing is an

electrical shock hazard.

8. Use clamps or another practical way

to support the workpiece and secure it to

a stable platform. Holding the work by hand

or against your body is unstable and may

lead to loss of control.

9. When operating a power tool outside,

use an outdoor extension cord marked

“W-A” or “W”. These cords are rated

for outdoor use and reduce the risk of

electric shock. The following table shows

the correct size to use, depending on cord

length and nameplate amperage rating

of the tool. When in doubt, use the next

heavier gauge. Always use UL and CSA

listed extension cords.

Recommended sizes of extension cords:

Tool’s Ampere Rating Volts

Total length of cord in feet

Cord size in A. W. G. (minimum)

25’ 50’ 100’ 150’

0–6

120 V~

18 16 16 14

6–10 18 16 14 12

10–12 16 16 14 12

12–16 14 12 Not Recommended

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentarios a estos manuales

Sin comentarios