MasterForce SM3051M Especificaciones descargar pdf (Pagina 22)

BODY AND HAND POSiTiON (FIG. 25)

CAUTION

Never place hands near the cutting

area. Proper positioning of your body

and hands when operating the miter

saw will make cutting easier and

safer. Keep children away, Keep all

visitors at a safe distance from the

miter saw, Make sure bystanders are

clear of the saw and workpiece. Do

not force the saw, it will do the job

better and safer at its designed rate,

Starting a cut:

® Place hands at least 8-3/4 in. away from the

path of the blade = out of the "no-hands zone

(1)'. (Fig. 25)

® Hold workpiece firmly against the fence to

prevent movement toward the blade.

® With the power switch OFF, bring the saw

blade down to the workpiece to see the

cutting path of the blade.

® Squeeze trigger switch to start saw.

® Lower blade into workpiece with a firm

downward motion.

Finishing a cut:

® Hold the cutting arm in the down position.

® Release trigger switch and wait for all moving

parts to stop before moving your hands and

raising the cutting arm.

® If the blade doesn't stop within 10 seconds,

unplug the saw and follow the instructions in

TROUBLESHOOTING GUIDE section.

Before freeing jammed material:

® Release trigger switch.

® Wait for all moving parts to stop.

® Unplug the miter saw.

Fig. 25

No-Hand Zone (1)

-i

8-3/4 in.

BASIC SAW OPERATIONS

CAUTION

For your convenience, your saw has a blade

brake. The brake is not a safety device. Never

rely on it to replace the proper use of the

guard on your saw. If the blade doesn't stop

within approximately 10 seconds, wait for the

blade to stop, unplug the saw and contact

customer service.

TO TURN SAW ON (FIG. 26)

Squeeze the trigger switch (1) to turn the miter

saw ON. Release the trigger switch to turn the

saw OFF.

NOTE: Make the ON/OFF switch childproof.

Insert a padlock, or chain with padlock, through

the holes (2) in the trigger switch, locking the

tool's switch, preventing children and other

unauthorized users from turning the machine on.

The miter saw is equipped with an automatic

blade brake. When the trigger switch is released,

the electric blade brake will stop the blade within

approximately 10 seconds.

Fig. 26

CAUTION

To avoid injury, after completing a cut and

releasing the trigger switch, allow the blade

brake to activate and stop the blade before

raising the cutting head.

CAUTION

To avoid injury, check and tighten the arbor

bolt periodically.

BEFORE LEAVING THE SAW

® Never leave tool running unattended. Turn

power OFF. Wait for all moving parts to stop.

® Make workshop childproof. Lock the shop.

Disconnect master switches. Store tool away

from children and other unqualified users.

22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 37 38

Comentarios a estos manuales

Sin comentarios