MasterForce SM3051M Especificaciones descargar pdf (Pagina 28)

Bevel/Miter Settings

KEY BEVEL ! MITER I TYPEOFCUT

SETTING SETTING

inside corner=Left side

IL 33.9 31.6 ° Right 1. Position top of molding

against fence.

2. Miter table set at

RIGHT 31.6 ° .

3. LEFT side is finished

piece.

Inside corner=Right side

IR 33.9 31.6 ° Left 1. Position bottom of

molding against fence.

2. Miter table set at LEFT

31.6 ° .

3. LEFT side is finished

piece.

Outside corner=Left side

OL 33.9 31.6 ° Left 1. Position bottom of

molding against fence.

2. Miter table set at LEFT

31.6 ° .

3. RIGHT side is finished

piece.

Outside corner=Right side

OR 33.9 31.6 ° Right 1. Position top of molding

against fence.

2. Miter table set at

RIGHT 31.6 ° .

3. RIGHT side is finished

piece.

Fig. 44

CHANGING THE BELT (FIG. 43, 44)

® Unplug your saw.

1. Loosen the bolts (1) and remove the belt

cover.

2. Turn the screw (2) anti-clockwise with an Allen

wrench to move the motor to forward.

3. Remove and replace the belt.

4. Turn the screw (2) clockwise with an Allen

wrench to move the motor to rearward. Do not

over tighten.

5. Replace the belt cover and tighten the bolts.

Fig. 43

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

Comentarios a estos manuales

Sin comentarios

MasterForce SM3051M Especificaciones Pagina 28

Comentarios a estos manuales